S.S. White Ready-Flex with Casing come in two types of assemblies - Oilite Bearings Assemblies and Ball Bearings Assemblies.

Both Oilite and Ball Bearings Assemblies are available in ten (10) different diameter sizes: .130, .150, .187, .250, .312, .375, .500, .625, .750, and 1.000. Casing is usually necessary for shaft lengths that exceed 8 inches.

Casing is recommended when the environment is dirty, dusty, or corrosive or

Casing is also recommended when the shafts are run at high speeds in exposed areas where injury can occur.

Refer to the chart below to find specifics on each assembly diameter.